SHUR-KUT Coated Abrasives
Quick-Change Discs
SHUR-KUT
RIGID-KUT CERAMIC QUICK CHANGE DISC
TYPE R/TYPE S
▸ Specialized rigid and stiff backing that resists snagging and flexing
▸ Self-sharpening ceramic grains produce a cooler cut
▸ Ideal for aggressive, high-pressure applications and hard alloys
Type | Diameter | Max RPM | Optimal RPM | Std. Pkg. | 36 Grit | 50 Grit | 60 Grit | 80 Grit | 100 Grit | 120 Grit |
Type R | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A44456 | A123456 | A123456 | A123456 |
Type R | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
SHUR-KUT
CERAMIC GRINDING AID
TYPE R/TYPE S
▸ Additional grinding aid further reduces heat and extends disc life
▸ Self-sharpening ceramic grains continually produce fresh cutting points
▸ Ideal for high temperature grinding, stainless steel, and alloys
Type | Diameter | Max RPM | Optimal RPM | Std. Pkg. | 36 Grit | 50 Grit | 60 Grit | 80 Grit | 100 Grit | 120 Grit |
Type R | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A44456 | A123456 | A123456 | A123456 |
Type R | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
SHUR-KUT
CERAMIC SELECT
TYPE R/TYPE S
▸ Self-sharpening ceramic grains produce a cooler cut
▸ Consistent cutting power and long-lasting performance
▸ Ideal for everyday production environments
Type | Diameter | Max RPM | Optimal RPM | Std. Pkg. | 36 Grit | 50 Grit | 60 Grit | 80 Grit | 100 Grit | 120 Grit |
Type R | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A44456 | A123456 | A123456 | A123456 |
Type R | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
SHUR-KUT
SILICONE CARBINE
TYPE R/TYPE S
▸ Grains are friable, prevent clogging, and produce finer scratches
▸ Ideal for fine sanding and polishing applications on non-ferrous metals
▸ Available in finer grits
Type | Diameter | Max RPM | Optimal RPM | Std. Pkg. | 36 Grit | 50 Grit | 60 Grit | 80 Grit | 100 Grit | 120 Grit |
Type R | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A44456 | A123456 | A123456 | A123456 |
Type R | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 2" | 3,0000 | 10,500 | 100 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
Type S | 3" | 2,0000 | 7,000 | 50 | A123456 | A123456 | A123456 | A123456 | A123456 | A123456 |
SHUR-KUT
SILICONE CARBINE
TYPE R/TYPE S
▸ Grains are friable, prevent clogging, and produce finer scratches
▸ Ideal for fine sanding and polishing applications on non-ferrous metals
▸ Available in finer grits
Max RPM — 30,000
Optimal RPM — 10,500
Std Pkg. — 100
36 Grit — A016798
50 Grit — A016667
60 Grit — A016531
80 Grit — A016256
100 Grit — A016141
120 Grit — A016142
Overlapping layers of coated abrasives wear down to expose new cutting surfaces, allowing extended use of flap discs and much more control and comfort than rigid grinding wheels. The profile of flap discs, either flat faced (Type 27) or angle faced (Type 29) controls the amount of leverage applied to surfaces. Type 27 flap discs are better for finesse and extended use, whereas Type 29 discs are much more aggressive. Standard density discs provide less flap compression, best suited for stock removal and rough shaping. High density discs utilize more flaps, prolonging life, and are less compressed, allowing limited conformability to the workpiece.
Features:
- Larger flaps for greater surface contact
- Extra-long product life
- Aggressive stock removal on hard metals
- Sharp cut reduces heat, friction and loading
- High pressure applications
*Stock Items in Red
Max RPM — 30,000
Optimal RPM — 10,500
Std Pkg. — 100
36 Grit — A017496
50 Grit — A017370
60 Grit — A017290
80 Grit — A017245
100 Grit — A017117
120 Grit — A017118
Overlapping layers of coated abrasives wear down to expose new cutting surfaces, allowing extended use of flap discs and much more control and comfort than rigid grinding wheels. The profile of flap discs, either flat faced (Type 27) or angle faced (Type 29) controls the amount of leverage applied to surfaces. Type 27 flap discs are better for finesse and extended use, whereas Type 29 discs are much more aggressive. Standard density discs provide less flap compression, best suited for stock removal and rough shaping. High density discs utilize more flaps, prolonging life, and are less compressed, allowing limited conformability to the workpiece.
Features:
- Larger flaps for greater surface contact
- Extra-long product life
- Aggressive stock removal on hard metals
- Sharp cut reduces heat, friction and loading
- High pressure applications
*Stock Items in Red
Max RPM — 30,000
Optimal RPM — 10,500
Std Pkg. — 100
36 Grit — A016797
50 Grit — A016666
60 Grit — A016530
80 Grit — A016255
100 Grit — A016139
120 Grit — A016140
Overlapping layers of coated abrasives wear down to expose new cutting surfaces, allowing extended use of flap discs and much more control and comfort than rigid grinding wheels. The profile of flap discs, either flat faced (Type 27) or angle faced (Type 29) controls the amount of leverage applied to surfaces. Type 27 flap discs are better for finesse and extended use, whereas Type 29 discs are much more aggressive. Standard density discs provide less flap compression, best suited for stock removal and rough shaping. High density discs utilize more flaps, prolonging life, and are less compressed, allowing limited conformability to the workpiece.
Features:
- Larger flaps for greater surface contact
- Extra-long product life
- Aggressive stock removal on hard metals
- Sharp cut reduces heat, friction and loading
- High pressure applications
*Stock Items in Red
Max RPM — 30,000
Optimal RPM — 10,500
Std Pkg. — 100
36 Grit — A017495
50 Grit — A022742
60 Grit — A017289
80 Grit — A017244
100 Grit — A022743
120 Grit — A017116
Overlapping layers of coated abrasives wear down to expose new cutting surfaces, allowing extended use of flap discs and much more control and comfort than rigid grinding wheels. The profile of flap discs, either flat faced (Type 27) or angle faced (Type 29) controls the amount of leverage applied to surfaces. Type 27 flap discs are better for finesse and extended use, whereas Type 29 discs are much more aggressive. Standard density discs provide less flap compression, best suited for stock removal and rough shaping. High density discs utilize more flaps, prolonging life, and are less compressed, allowing limited conformability to the workpiece.
Features:
- Larger flaps for greater surface contact
- Extra-long product life
- Aggressive stock removal on hard metals
- Sharp cut reduces heat, friction and loading
- High pressure applications
*Stock Items in Red
Disc
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Wheels
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Belts
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
DCartridge Rolls
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Bore Polisher
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Band
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Cap
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Goblet
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Cone
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Pads
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Cross Buff Stars
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module
Sheets & Rolls
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module